해킨질답
  • 목록
  • 아래로
  • 위로
  • 쓰기
  • 검색

퓨리온님의 듀얼부팅을 설치하고 나서...

  • 하수
  • 577
  • 6
하수님의 기기정보
보유한 기기가 없습니다

 

윈도우를 먼저 설치하고 다름 맥을 설치하는 방식으로 설치하였씁니다. 

 

둘다 UEFI 방식으로 설치하였고, 설치가 완료 되자, 문제가 발생했습니다.

 

클로버 부트로더를 설치한 후에, 부팅을 실시하면 바로 윈도우로 직행하게 되는데, 

 

제가 업로드한 사진(EFI 파티션입니다. )에 있는 마이크로 소프트 라는 폴더를 삭제하면, 윈도우로는 아예 부팅이 안됩니다.(선택은 되지만 실행은 안됩니다.)

 

어떻게 해결해야 할까요..?" 

 

클로버에 옵션이 따로 있을까요??스크린샷 2016-05-16 오전 2.13.24.png

 

하수
6 Lv. 2599/3000P

댓글 6

참여를 하시면 세상을 바꿉니다.
1등 하수 작성자 2016.05.16. 14:16 |댓주소:#1186945
하수(본인)
혼자 해결했습니다. !
https://www.insanelymac.com/forum/topic/293574-beginners-guide-to-uefi-tripledual-boot-os-x-windows-and-linux-kali-on-an-single-true-gpt-ssd/?p=1968832
글타래 아래에 있는 

Fix Clover bootloader to dual boot OS X Mavericks / Windows 8.1 from ssd/hdd
 

First Part:

Really easy, go to youre BIOS and go to the Boot tab. Find UEFI Hard Disk Drive BBS options or something simulair to what i have.

Then set Clover as primairy. Like we did in post #6.

That should be it. Confirm working, If you do not have a option to change it in bios then you should use the second part of this post.

Second part:

Optional, if the first part didn't work for you then proberly you uefi firmware is badly written by youre manufacter. Some times you need the next steps to succesfully boot into clover.
 

Like a year ago with my old clover we had to use these following steps. Prpbery cause of old Clover back then. So if its booting straiglty to Windows instead of Clover and the first part didnt fixed it, then read this.

  1. Boot from the OS X Clover usb again. (If you cant boot from usb and it goes to windows automaticly, just reset youre pc, as soon as it shows bios loading, reset it again, and then select usb as boot device)
  2. Mount the main EFI with Clover configurator;
  3. Open the main EFI file drive on the desktop, browse to EFI/Clover and copy CLOVERX64.efi  to /EFI/Mircosoft/Boot.
  4. In EFI/Microsoft/Boot rename the file bootmgrfw.efi to bootmgfw-orig.efi
  5. In EFI/Microsoft/Boot rename the file CLOVERX64.EFI to bootmgfw.efi
  6. Reboot without the Clover USB

Clover entrie for Windows

Attached File  Screen Shot 2014-08-29 at 9.01.12 PM.png   240.47KB   476 downloads

 

Now you should have a working Dual boot OS X Mavericks and Windows 8.1 from the interal Clover EFI partition.


보고 


  1. Open the main EFI file drive on the desktop, browse to EFI/Clover and copy CLOVERX64.efi  to /EFI/Mircosoft/Boot.
  2. In EFI/Microsoft/Boot rename the file bootmgrfw.efi to bootmgfw-orig.efi
  3. In EFI/Microsoft/Boot rename the file CLOVERX64.EFI to bootmgfw.efi
  4. Reboot without the Clover USB
단계를 거쳐서해결했습니다.
의외로 간단했네요!!!!

이제 안정화해야징!
댓글
3등 하수 작성자 2016.05.16. 14:28 |댓주소:#1186960
하수(본인)
감사합니다 ㅎㅎㅎ 저같은경우는 윈도우 efi가 클로버를 씹어먹...은경우인거같아요!

댓글
profile image
Tamy 2017.10.20. 09:56 |댓주소:#1813363
하수

uefi방식으로 설치하면 Microsoft폴더가 생기며 그 안에 부팅관련 파일이 생깁니다.

그 폴더를 삭제하면 당연히 안되지요.

해결하셨다니 다행입니다.

단일 디스크에 설치하면 어쩔 수 없이 uefi로 윈도우즈를 설치해야겠지만(mbr방식말고),

저는 골치아파 디스크 두개로 각각 설치합니다.

맥(gpt) + 윈도우즈(mbr)

댓글
profile image
꾸샤 2017.10.20. 14:26 |댓주소:#1813740
하수

HP Envy 15-Q214TX 랩탑에 맥 설치 후 윈도우를 설치한 케이스로 HP InsydeH20 BIOS 를 쓰고 있습니다.

기본 윈도우즈10이 부팅되고 부트 옵션 F9 를 눌러 EFI 파티션에서 CLOVERX64.EFI 를 선택하여 클로버를 부팅 시켜야 하는 상태였고

[역시, 클로버 옵션에서 add boot device 를 해서 맨날 번거롭게 boot file -> efi . blah blah 를 하지는 않았습니다.]

위의 내용과 같이 EFI 파티션에 /EFI/CLOVER/CLOVERX64.EFI 파일을 /EFI/Mircosoft/Boot/bootmgrfw.efi 로 변경 후 클로버가 뜨긴 하는데 윈도우10 이 안나오네요.

그래서, /EFI/BOOT/BOOTX64.EFI 을 넣어봤는데 Windows 10 파티션이 나와서 기뻐 했지만, 파티션을 선택하면 Windows 10 파티션이 안나타는 클로버로 넘어가는...

 

그래서, 더 나은 방법을 찾기 전까지 그냥 윈도우 기본 부팅에 맥을 띄울때 부팅 efi 를 선택하는 방식으로 당분간 이용해야겠습니다.

뭔가를 모르고 있는거 같은데...그게 뭘까요? ㅎㅎ

댓글
권한이 없습니다. 로그인

신고

"님의 댓글"

이 댓글을 신고 하시겠습니까?

삭제

"님의 댓글"

이 댓글을 삭제하시겠습니까?