PC 주변기기
  • 목록
  • 아래로
  • 위로
  • 쓰기
  • 검색

PC주변기기 BCM94352Z 잠자기후 깨어나서 블루투스장치 인식이 지연 되거나 안될때 입니다.

goldbat님의 기기정보
노트북 : Dell XPS 15 9550 Cpu : i7-6700HQ Memory : 32gb SSD : 512 gb Graphic : Intel HD 530

커스텀 노트북 을 사용하면서 업데이트가 있을때마다 갈등이 생기네요~~~   할까 말까~~~~

그러다 결국 업데이트하고 마는~~~

 

10.12.4 업데이트 하고 난뒤 그동안 잘 사용하고 있던 BCM94352Z 의 블루투스가 잠자기후 깨어날때 바로 인식이 안되고

30초 이상 기다려야 장치 인식 되거나 아예 인식이 안되어서 리부팅을 해야 하는 ~~~ㅠㅠ  (장치인식후 페어링은 잘됨)

BCM94352Z 블루투스 kext 는  잘 아시다 시피

스크린샷 2017-04-03 오전 8.20.21.png

BcmPatchRAM2.kext 와 BcmFirmwareDate.kext 를 efi-Clover-kext-other 폴더에서 넣어서 사용 했습니다.

10.12.3 에서는 이상없이 사용되었으나 10.12.4 에서는 잠자기후 깨어나기 에서 문제가 생기네요~~

 이리 저리 알아 보다 역시 답은 RehabMan 에게 있더군요

Also, install one firmware kext BrcmFirmwareData.kext or BrcmFirmwareRepo.kext, depending on installation location, never both.

  • BrcmFirmwareRepo.kext: Install to /System/Library/Extensions. This kext is much more memory efficient than BrcmFirmwareData.kext and is the preferred configuration.

  • BrcmFirmwareData.kext: Most appropriate for EFI/Clover/kexts. BrcmFirmwareRepo.kext, while much more memory efficient, cannot be injected as can BrcmFirmwareData.kext

  • Advanced users: For custom firmware injectors, install the injector plus BrcmFirmwareRepo.kext. This works from either /S/L/E or EFI/Clover/kexts. Optionally, you may remove all the firmwares from BrcmFirmwareRepo.kext/Contents/Resources. If you're using the injector from Clover/kexts, the IOProviderClass in the Info.plist for BrcmFirmwareRepo.kext must be changed from "disabled_IOResources" to "IOResources". And still, you may find it unreliable... as that is the way Clover kext injection is (it does not simulate kext installation perfectly). In testing, best result was obtained if you replace the IOKitPersonalities entry in BrcmFirmwareRepo.kext Info.plist with that of the injector kext (no need for the injector at that point).

 

위의 내용에 따라 BcrmFirmwareData.kext 를 삭제하고 

BrcmFirmwareRepo.kext 를 /S/L/E 에 설치 하고 리부팅 하니 잠자기후 블루투스 장치 인식이 바로 되는군요

긴 잠에서도 잘 인식 하네요 

 

이렇게 또 하나 배워 가네요~~~

 

P/S : BrcmFirmwareRepo.kext 설치후 긴 잠에서 깨어 났을때 블루투스 장치 인식이 지연되는건 여전하네요~~

이는 아무래도 usb 쪽 문제 인것 같네요

저의 엘지그램에서는 

스크린샷 2017-04-04 오후 6.39.15.png

usb 3.0 만 인식 하고 있습니다. 

그래서 

USBInjectALL.kext 를 설치 했을경우 에는 긴잠에서 깨어 날때 블루투스 장비를 인식 못하고 리부팅을 해야 하는 경우가 생기고

RehabMan 의 FakePCIID.kext 와 FakeFakePCIID_XHCIMux.kext 로 했을때 짧은 잠에서는 바로 인식, 긴잠에서는 딜레이 인식 ~~

입니다.

 

  • 구독(44명)

goldbat goldbat
82 Lv. 82517/83000P

댓글 3

참여를 하시면 세상을 바꿉니다.

댓글 쓰기

선택 삭제 전체 선택
익명상태

신고

"님의 댓글"

이 댓글을 신고 하시겠습니까?

삭제

"님의 댓글"

이 댓글을 삭제하시겠습니까?