게임X86 밸브 스팀os 공개
Mactopia님의 기기정보
CPU : XEON 1230 V2
MAINBOARD : ZOTAC Z77 ITX WIFI
GRAPHIC : AMD RX 570 4096 MB
MEM : 16GB XMP
HDD : SAMUNG SSD 830 256GB
PSU : SliverStone SX600-G
Mactopia
댓글 3
참여를 하시면 세상을 바꿉니다.
Mactopia(본인)
Q: What are the SteamOS Hardware Requirements?
- Intel or AMD 64-bit capable processor
- 4GB or more memory
- 500GB or larger disk
- NVIDIA graphics card (AMD and Intel graphics support coming soon)
- UEFI boot support
- USB port for installation
UEFI 만 되네요...
Mactopia(본인)
AMD 그래픽카드는 아직 안되네요. 해킨깔듯 깔아서 써볼까요? 4GB 이상 + FAT32 라고 하네요. ㅎㅎ
- Format a 4GB or larger USB stick with the FAT32 filesystem. Use "SYSRESTORE" as the partition name
- Unzip the contents of SYSRESTORE.zip to this USB stick to create the System Restore USB stick
- Put the System Restore USB stick in your target machine. Boot your machine and tell the BIOS to boot off the stick. (usually something like F8, F11 or F12 will bring up the BIOS boot menu).
- Make sure you select the UEFI entry, it may look something like "UEFI: Patriot Memory PMAP"
- Select "Restore Entire Disk" from the GRUB menu.
- System Restore will proceed automatically. When it is complete it will reboot into your freshly re-imaged SteamOS
The second method is based on the Debian Installer. It requires multiple configuration steps:
- Unzip the SteamOSInstaller.zip file to a blank, FAT32-formatted USB stick.
- Put the USB stick in your target machine. Boot your machine and tell the BIOS to boot off the stick. (usually something like F8, F11, or F12 will bring up the BIOS boot menu).
- Make sure you select the UEFI entry, it may look something like "UEFI: Patriot Memory PMAP"
- Pick "Automated Install" from the next menu.
- The rest of the installation is unattended and will repartition the drive and install SteamOS.
- After installation is complete, log onto the resulting system (using the Gnome session) with the predefined "steam" account. The password is "steam". Run steam, accept the EULA, and let it bootstrap. Logoff the steam account
- Log on with the "desktop" account. The password is "desktop"
- From a terminal window, run ~/post_logon.sh. This will prompt for a password - enter "desktop". This script will perform the post-install customizations, delete itself, then reboot into the recovery partition capture utility.
- Confirm "y" to continue and the recovery partition will be created. When it is finished, reboot into your freshly installed SteamOS