해킨질답
  • 목록
  • 아래로
  • 위로
  • 쓰기
  • 검색

X86Platform 관련 플러그인 로드가 안되는 증상..

한결류1님의 기기정보
보유한 기기가 없습니다
추가사양 및 설치(할)OS 10.13
공지숙지/증상설명 숙지

AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x1cc46baf068 (47 MHz)
MWAIT C-States...........................: 1319200

Processor Brandstring....................: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz

Processor Signature..................... : 0x906E9
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 9
 - Model................................ : 0x9E (158)

Model Specific Registers (MSRs)
------------------------------------------

MSR_IA32_PLATFORM_ID.............(0x17)  : 0x4000000000000
------------------------------------------
 - Processor Flags...................... : 1

MSR_CORE_THREAD_COUNT............(0x35)  : 0x40008
------------------------------------------
 - Core Count........................... : 4
 - Thread Count......................... : 8

MSR_PLATFORM_INFO................(0xCE)  : 0x80838F1012A00
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x2A (4200 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 0 (LMP not supported)
 - Number of ConfigTDP Levels........... : 0 (only base TDP level available)
 - Maximum Efficiency Ratio............. : 8
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E008006
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 1 (MSR locked until next reset)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x31814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 3 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x370F5FCC8A
IA32_APERF.......................(0xE8)  : 0x28AAC31204

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x25D800002A00
------------------------------------------
 - Current Performance State Value...... : 0x2A00 (4200 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xD00
------------------------------------------
 - Target performance State Value....... : 0xD00 (1300 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88340800
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 1
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 52
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x641400
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x1CC1
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 0 (thermal interrupt not rerouted)
 - SpeedShift Technology Enable......... : 1 (enabled)
 - SpeedShift Interrupt Coordination.... : 1 (enabled)
 - SpeedShift Energy Efficient Perf..... : 1 (enabled)
 - SpeedShift Technology Setup for HWP.. : Yes (setup for HWP)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2D2D2D2D
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 2D (4500 MHz) 
 - Maximum Ratio Limit for C02.......... : 2D (4500 MHz) 
 - Maximum Ratio Limit for C03.......... : 2D (4500 MHz) 
 - Maximum Ratio Limit for C04.......... : 2D (4500 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
 - Power Policy Preference...............: 1 (highest performance)

MSR_POWER_CTL....................(0x1FC) : 0x3C005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x42FFD0001AEA82
------------------------------------------
 - Package Power Limit #1............... : 3408 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 0 (disabled)
 - Time Window for Power Limit #1....... : 13 (20480 milli-Seconds)
 - Package Power Limit #2............... : 4090 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x80EC67E
------------------------------------------
 - Total Energy Consumed................ : 8251 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x31B4AE5
------------------------------------------
 - Total Energy Consumed................ : 3181 Joules (Watt = Joules / seconds)

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x31B4C88
------------------------------------------
 - Total Energy Consumed................ : 3181 Joules (Watt = Joules / seconds)

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x84DB
------------------------------------------
 - Total Energy Consumed................ : 2 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x2A
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x0
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x0
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x884E
MSR_PKGC6_IRTL...................(0x60b) : 0x8876
MSR_PKGC7_IRTL...................(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x9E63ABEEDE
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x6BFB7D31D4
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x9E640350CA
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x6BFB7D31D4
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
MSR_PKG_C8_RESIDENCY.............(0x630) : 0x0
MSR_PKG_C9_RESIDENCY.............(0x631) : 0x0
MSR_PKG_C10_RESIDENCY............(0x632) : 0x0
MSR_PKG_C8_LATENCY...............(0x633) : 0x0
MSR_PKG_C9_LATENCY...............(0x634) : 0x0
MSR_PKG_C10_LATENCY..............(0x635) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS)

MSR_PPERF........................(0x64E) : 0x43D3921517
------------------------------------------
 - Hardware workload scalability........ : 291312375063

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x4000000
------------------------------------------
 - PROCHOT Status....................... : 0
 - Thermal Status....................... : 0
 - Residency State Regulation Status.... : 0
 - Running Average Thermal Limit Status. : 0
 - VR Therm Alert Status................ : 0
 - VR Therm Design Current Status....... : 0
 - Other Status......................... : 0
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Status............... : 0
 - Turbo Transition Attenuation Status.. : 0
 - PROCHOT Log.......................... : 0
 - Thermal Log.......................... : 0
 - Residency State Regulation Log....... : 0
 - Running Average Thermal Limit Log.... : 0
 - VR Therm Alert Log................... : 0
 - VR Thermal Design Current Log........ : 0
 - Other Status Log..................... : 0
 - Package/Platform-Level #1 Power Limit : 1 (status bit has asserted)
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Log.................. : 0
 - Turbo Transition Attenuation Log..... : 0
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x0

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x1CC8683520F
MSR_PPERF........................(0x63E) : 0x1 (39)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x10B2A2D
-----------------------------------------
 - Highest Performance.................. : 45
 - Guaranteed Performance............... : 42
 - Most Efficient Performance........... : 11
 - Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x0
------------------------------------------
 - Guaranteed Performance Change........ : 0 (Interrupt generation disabled)
 - Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST................(0x774) : 0x20002A01
-----------------------------------------
 - Minimum Performance................. : 1
 - Maximum Performance................. : 42
 - Desired Performance................. : 0
 - Energy Efficient Performance........ : 32
 - Activity Window..................... : 0, 0
 - Package Control..................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
 - Guaranteed Performance Change....... : 0 (has not occured)
 - Excursion To Minimum................ : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 42 (4200 MHz)
Maximum Turbo Ratio/Frequency............: 45 (4500 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................:    0 MHz
IGPU Minimum Frequency...................:  350 MHz
IGPU Maximum Non-Turbo Frequency.........:  350 MHz
IGPU Maximum Turbo Frequency.............: 1150 MHz
IGPU Maximum limit.......................: 3000 MHz

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (24) 31 42 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 3 ]
CPU C6-Cores [ 0 2 3 5 6 7 ]
CPU C7-Cores [ 3 4 5 6 7 ]
CPU C3-Cores [ 0 1 3 4 5 ]
CPU C6-Cores [ 0 1 2 3 5 6 7 ]
CPU C7-Cores [ 2 3 4 5 6 7 ]
CPU P-States [ 24 31 (39) 42 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 3 4 5 7 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 24 31 39 (40) 42 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 3 4 5 6 7 ]
CPU P-States [ (12) 24 31 39 40 42 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 12 (17) 24 31 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 12 17 (18) 24 31 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 12 (16) 17 18 24 31 39 40 42 ] iGPU P-States [ ]
CPU P-States [ (8) 12 16 17 18 24 31 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 12 (14) 16 17 18 24 31 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 12 14 16 17 18 24 (28) 31 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 12 14 16 17 18 24 (25) 28 31 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 12 14 16 17 18 24 25 28 31 (38) 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 (9) 12 14 16 17 18 24 25 28 31 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 12 14 16 17 18 24 25 28 (30) 31 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 12 14 16 17 18 (22) 24 25 28 30 31 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 12 14 16 17 18 (19) 22 24 25 28 30 31 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 12 14 16 17 18 19 22 24 25 28 30 31 (33) 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 12 14 16 17 18 19 (21) 22 24 25 28 30 31 33 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 12 14 16 17 18 19 21 22 (23) 24 25 28 30 31 33 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 (10) 12 14 16 17 18 19 21 22 23 24 25 28 30 31 33 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 10 12 14 16 17 18 19 21 22 23 24 25 (27) 28 30 31 33 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 10 12 14 (15) 16 17 18 19 21 22 23 24 25 27 28 30 31 33 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 10 12 (13) 14 15 16 17 18 19 21 22 23 24 25 27 28 30 31 33 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 10 12 13 14 15 16 17 18 19 21 22 23 24 25 27 28 30 31 (32) 33 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 10 12 13 14 15 16 17 18 19 21 22 23 24 25 27 28 (29) 30 31 32 33 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 10 12 13 14 15 16 17 18 19 (20) 21 22 23 24 25 27 28 29 30 31 32 33 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 27 28 29 30 31 32 33 (36) 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 9 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 (26) 27 28 29 30 31 32 33 36 38 39 40 42 ] iGPU P-States [ ]

 

 

 

뭔가 하나가 되면 다른 하나가 안되고 이러는 것 같네요.

위는 스피드스텝 뜨는 로그입니다.

HWP도 활성화 되어있고 베이스클럭도 8로 뜨는데..

 

X86Platform 플러그인 두개가 로드가 안되네요.

처음 설치할땐 됐던거로 기억해서 맘 놓고 쓰고 있었는데 지금은 무슨짓을 해도 안됩니다.

심지어 처음 설치할때 백업해놓았던... EFI로 복원해놨는데도 그러네요..

 

원래 두개가 로드가 안되는건지..

 

ssdtprgen으로 SSDT 제작해서 클로버에 넣어놨구요.. (DSDT 사용하지 않습니다.)

DSM패치 또한 되어있는데.. 혹시 뭐가 문제일까요..ㅜㅜ

한결류1
5 Lv. 1623/2000P

댓글 7

참여를 하시면 세상을 바꿉니다.
한결류1 작성자 2017.10.09. 22:13 |댓주소:#1795400
아이뱅크

링크 걸어주신 부분은 적용되어있습니다!

ACPI_SMC_PlatformPlugin 켁스트도 로드되고 있구요.

 

단지 X86Platform 관련 켓그트 두개가 로드 안되고 있습니다 ㅠㅠ

XCPM이라는 것도 안뜨구요.. 부트 로그에서..

 

원래 두개가 동시에 로드 안되는건지.. 분명 처음 설치햇을땐 됐거든요 둘다..ㅠ_ㅠ

AGPMEnabler인가? 이 항목도 IORG에 떴는데 X86Platform 켁스트 두개가 로드 안되니까 이 항목도 사라져있습니다.

댓글
한결류1 작성자 2017.10.09. 22:16 |댓주소:#1795420
아이뱅크

혹시 HWP를 꺼야할까요? 

 

  • choose HWP support model, e.g. MacBook9,1, MacBookPro13,1, MacBookPro13,2, MacBookPro13,3

이 내용을 봐서요..^^;;

이 기능 자체가 모바일을 위한 기능이라는 글을 봐서... 혹시 삭제해야하는지 궁금합니다.

댓글
한결류1 작성자 2017.10.10. 03:11 |댓주소:#1795900
아이뱅크

아이뱅크님!

혹시 몰라서 재설치를 했습니다.

HWP 관련 옵션은 모두 삭제했구요.


SSDTPRGEN으로 생성된 SSDT만 넣었습니다!

처음 설치하고나서 보면 분명 X86Platform 관련 플러그인 두개가 로드 되어있거든요..

 

근데 몇번 재부팅하고나니 (설정 안건드리고..)

다시 로드가 풀려있습니다. 물론 IORG상에서도 안뜨구요..

 

이거... 보드 문제인가요.. 제가 설정을 잘못한건지 ㅠ_ㅠ..

댓글
권한이 없습니다. 로그인

신고

"님의 댓글"

이 댓글을 신고 하시겠습니까?

삭제

"님의 댓글"

이 댓글을 삭제하시겠습니까?