해킨질답
  • 목록
  • 아래로
  • 위로
  • 쓰기
  • 검색

10.11.6 엘케피탄 그래픽이 죽어도 안잡힙니다 제발 도와주세요

미스터훈님의 기기정보
보유한 기기가 없습니다
추가사양 및 설치(할)OS 10.11.6 퓨리온님 이미지
공지숙지/증상설명 숙지

예전에 10.11.3인가 썼었고 그래픽 잘 잡아서 쓰다가 시에라 넘어가려고 업그레이드 했는데 도저히 그래픽이 안잡혀 다시 엘케피탄에 내려와서도 그래픽이 안잡힙니다.

고수님들의 조언 부탁드립니다.

 

0:100  0:100  MemLog inited, TSC freq: 3392142268
0:100  0:000  
0:100  0:000  Now is 26.1.2017,  6:51:44 (GMT)
0:100  0:000  Starting Clover revision: 3974 on American Megatrends EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.3 | XCODE: 8.2.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000) @D2F4EE98
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Samsung
0:100  0:000  SmbiosTable.Type17->SerialNumber = 13BDBF44
0:100  0:000  SmbiosTable.Type17->PartNumber = M378B1G73QH0-CK0  
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = Samsung
0:100  0:000  SmbiosTable.Type17->SerialNumber = 137C8D1D
0:100  0:000  SmbiosTable.Type17->PartNumber = M378B1G73EB0-CK0  
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Samsung
0:100  0:000  SmbiosTable.Type17->SerialNumber = 13BDB971
0:100  0:000  SmbiosTable.Type17->PartNumber = M378B1G73QH0-CK0  
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = Samsung
0:100  0:000  SmbiosTable.Type17->SerialNumber = 137C8747
0:100  0:000  SmbiosTable.Type17->PartNumber = M378B1G73EB0-CK0  
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'B85M-DS3H-A' with board 'B85M-DS3H-A'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=306C3
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  got cores from CPUID_1 = 0
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz
0:100  0:000  MSR 0xE2 before patch 1E000402
0:100  0:000  MSR 0xE4              00001814
0:100  0:000  MSR 0xCE              00080838_F7012200
0:100  0:000  non-usable FLEX_RATIO = 10000
0:100  0:000  corrected FLEX_RATIO = 0
0:100  0:000  FSBFrequency=105MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x3C/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 34.0/8
0:100  0:000  Turbo: 36/37/38/38
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 8
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3600 MHz
0:100  0:000  TSC: 3600 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0C08 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0C01 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 17C8 class=030000
0:100  0:000   - GFX: Model=Zotac GeForce GTX 980 TI family 120 (Nvidia)
0:100  0:000  PCI (00|01:00.01) : 10DE 0FB0 class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:14.00) : 8086 8C31 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 8C3A class=078000
0:100  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:100  0:000  PCI (00|00:1A.00) : 8086 8C2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 8C20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 8C10 class=060400
0:100  0:000  PCI (00|00:1C.02) : 8086 8C14 class=060400
0:100  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|00:1D.00) : 8086 8C26 class=0C0320
0:100  0:000  PCI (00|00:1F.00) : 8086 8C50 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 8C02 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 8C22 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:102  0:001  EFI\CLOVER\config.plist loaded: Success
0:102  0:000  === [ GetListOfThemes ] ===================================
0:103  0:001  - [00]: EMBEDDED
0:105  0:002  - [00]: RANDOM
0:107  0:002  - [00]: christmas
0:110  0:003  - [01]: NEWYEAR
0:113  0:002  - [02]: BGM
0:121  0:007  - [03]: METAL
0:127  0:005  === [ Found config plists ] ===============================
0:127  0:000  - config.plist
0:127  0:000  === [ GetEarlyUserSettings ] ==============================
0:127  0:000  timeout set to 2
0:127  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:127  0:000  Default theme: newyear
0:127  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:127  0:000  Hiding entries with string Windows
0:127  0:000  Error in Early settings0: Not Found
0:127  0:000  === [ LoadDrivers ] =======================================
0:128  0:001  Loading AppleImageCodec-64.efi  status=Success
0:131  0:002  Loading AppleKeyAggregator-64.efi  status=Success
0:132  0:001  Loading AppleUITheme-64.efi  status=Success
0:134  0:001  Loading DataHubDxe-64.efi  status=Success
0:144  0:010  Loading FirmwareVolume-64.efi  status=Success
0:146  0:001  Loading FSInject-64.efi  status=Success
0:147  0:001  Loading OsxAptioFix2Drv-64.efi  status=Success
0:149  0:001  Loading OsxFatBinaryDrv-64.efi  status=Success
0:150  0:001  Loading SMCHelper-64.efi  status=Success
0:152  0:001  Loading VBoxHfs-64.efi  status=Success
0:153  0:001   - driver needs connecting
0:153  0:000  1 drivers needs connecting ...
0:153  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:153  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:291  0:137  === [ InitScreen ] ========================================
0:291  0:000  SetScreenResolution: 2560x1440 - not found!
0:291  0:000  SetMaxResolution: found best mode 4: 1600x1200
0:738  0:446  Video mode change to mode #4: Success
0:738  0:000   - set
0:738  0:000  Console modes reported: 5, available modes:
0:738  0:000   - [01]: 80x25 (current mode)
0:738  0:000   - [02]: 80x50
0:738  0:000   - [03]: 100x31
0:738  0:000   - [04]: 128x30
0:738  0:000   - [05]: 100x60
0:738  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000)
0:738  0:000  Using embedded font: Success
2:053  1:314  === [ GetMacAddress ] =====================================
2:053  0:000  MAC address of LAN #0= 40:8D:5C:26:F2:4F:
2:053  0:000  === [ ScanSPD ] ===========================================
2:053  0:000  SMBus device : 8086 8C22 class=0C0500 status=Success
2:053  0:000  SMBus CmdReg: 0x1
2:053  0:000  Scanning SMBus [8086:8C22], mmio: 0xF7215004, ioport: 0xF000, hostc: 0x11
2:053  0:000  Slots to scan [8]...
2:053  0:000  SPD[0]: Type 11 @0x50
2:071  0:017  DDR speed 1600MHz
2:071  0:000  Slot: 0 Type 24 8192MB 1600MHz Vendor=Samsung PartNo=M378B1G73QH0-CK0 SerialNo=01030B0D0B0F0404
2:072  0:000  SPD[1]: Type 11 @0x51
2:090  0:017  DDR speed 1600MHz
2:090  0:000  Slot: 1 Type 24 8192MB 1600MHz Vendor=Samsung PartNo=M378B1G73EB0-CK0 SerialNo=0103070C080D010D
2:090  0:000  SPD[2]: Type 11 @0x52
2:108  0:017  DDR speed 1600MHz
2:108  0:000  Slot: 2 Type 24 8192MB 1600MHz Vendor=Samsung PartNo=M378B1G73QH0-CK0 SerialNo=01030B0D0B090701
2:109  0:000  SPD[3]: Type 11 @0x53
2:127  0:017  DDR speed 1600MHz
2:127  0:000  Slot: 3 Type 24 8192MB 1600MHz Vendor=Samsung PartNo=M378B1G73EB0-CK0 SerialNo=0103070C08070407
2:127  0:000  === [ GetAcpiTablesList ] =================================
2:127  0:000  Get Acpi Tables List from RSDT:
2:127  0:000   - [00]: FACP  A M I len=132
2:127  0:000   - [01]: APIC  A M I len=146
2:127  0:000   - [02]: FPDT  A M I len=68
2:127  0:000   - [03]: SSDT  Cpu0Ist len=1337
2:127  0:000   - [04]: SSDT  CpuPm len=2776
2:127  0:000   - [05]: MCFG  A M I len=60
2:127  0:000   - [06]: HPET  A M I len=56
2:127  0:000   - [07]: SSDT  SataTabl len=877
2:127  0:000   - [08]: SSDT  SaSsdt  len=13537
2:127  0:000   - [09]: BGRT  A M I len=56
2:127  0:000  Calibrated TSC frequency =3392142268 =3392MHz
2:128  0:000  === [ GetUserSettings ] ===================================
2:128  0:000  USB FixOwnership: no
2:128  0:000  Dropping 3 tables:
2:128  0:000   - [00]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
2:128  0:000           - set table: 54445353,       6D50757043 to drop: yes
2:128  0:000   - [01]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
2:128  0:000           - set table: 54445353,   74734930757043 to drop: yes
2:128  0:000   - [02]: Drop table  signature="DMAR" (52414D44)
2:128  0:000           - set table: 52414D44,                0 to drop: no
2:128  0:000   - final DSDT Fix mask=00000000
2:128  0:000  MinMultiplier: 8
2:128  0:000  ChassisType: 0x6
2:128  0:000  CpuType: 402
2:142  0:014  === [ ScanVolumes ] =======================================
2:142  0:000  Found 10 volumes with blockIO
2:142  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
2:142  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
2:143  0:000          Result of bootcode detection: bootable Windows (vista,win)
2:143  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
2:144  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)
2:144  0:000          Found optical drive
2:144  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000)
2:144  0:000          Result of bootcode detection: bootable unknown (legacy)
2:153  0:008          This is SelfVolume !!
2:153  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0BC089E4-4255-4787-8291-5CC6B78E8544,0x64028,0xECE2340)
2:154  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,6586770E-2391-4A34-B8DE-0CDE7BCFA104,0xED46368,0x135F20)
2:154  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,MBR,0xEB2AE76C,0x2,0x2542EAAE)
2:155  0:000          Result of bootcode detection: bootable Windows (vista,win)
2:155  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,AC3E78AC-E096-4631-88C2-0BC4E3EB1E4D,0x28,0x64000)
2:155  0:000          Result of bootcode detection: bootable unknown (legacy)
2:170  0:014  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,DAEFE7F6-8705-497C-8065-D073A2CC10AD,0x64028,0x15D466360)
2:173  0:003  === [ InitTheme ] =========================================
2:174  0:001  Using theme 'newyear' (EFI\CLOVER\themes\newyear)
2:174  0:000  OS main and drive as badge
2:175  0:001  Loading font from ThemeDir: Success
2:175  0:000  Choosing theme newyear
2:176  0:000  found boot-args in NVRAM:nvda_drv=1, size=11
2:176  0:000  ...found arg:nvda_drv=1
2:176  0:000  after NVRAM boot-args=-v darkwake=0 nvda_drv=1 kext-dev-mode=1
2:176  0:000  === [ Dump SMC keys from NVRAM ] ==========================
2:176  0:000  found AppleSMC protocol
2:178  0:002     fakesmc-key-#KEY-ui32:00 00 00 11 
2:178  0:000     fakesmc-key-$Adr-ui32:00 00 03 00 
2:178  0:000     fakesmc-key-$Num-ui8:01 
2:178  0:000     fakesmc-key-RMde-char:41 
2:179  0:000     fakesmc-key-RPlt-ch8*:6B 35 00 00 00 00 00 00 
2:179  0:000     fakesmc-key-RBr -ch8*:6B 35 00 6A 31 37 00 00 
2:179  0:000     fakesmc-key-EPCI-ui32:02 C0 07 00 
2:179  0:000     fakesmc-key-REV -ch8*:01 39 0F 00 00 11 
2:179  0:000     fakesmc-key-BEMB-flag:00 
2:179  0:000     fakesmc-key-BATP-flag:00 
2:179  0:000     fakesmc-key-BNum-ui8:00 
2:180  0:000     fakesmc-key-MSTc-ui8:00 
2:180  0:000     fakesmc-key-MSAc-ui16:00 00 
2:180  0:000     fakesmc-key-MSLD-ui8:00 
2:180  0:000     fakesmc-key-MSWr-ui8:00 
2:180  0:000     fakesmc-key-MSFW-ui8:01 00 
2:180  0:000     fakesmc-key-MSPS-ui16:00 03 
2:183  0:002  === [ ScanLoader ] ========================================
2:183  0:000  - [04]: 'EFI'
2:198  0:014  - [05]: 'Macintosh HD'
2:205  0:006          AddLoaderEntry for Volume Name=Macintosh HD
2:208  0:002      Check if volume Is Hibernated:
2:208  0:000      Check sleep image 'by signature':
2:222  0:014      using default sleep image name = \private\var\vm\sleepimage
2:226  0:004      Reading first 512 bytes of sleepimage ...
2:227  0:000      OurBlockIoRead: Lba=2B24D10, Offset=5649A2000 (BlockSize=512)
2:227  0:000      sig lion: 74726150
2:227  0:000      sig snow: 74696D62
2:227  0:000      no valid sleep image offset was found
2:227  0:000      Reading completed -> Success
2:227  0:000       sleepimage offset could not be acquired
2:227  0:000      hibernated: no - sign
2:228  0:001  not png, try icns
2:239  0:010  - [06]: 'Recovery HD'
2:240  0:001          AddLoaderEntry for Volume Name=Recovery HD
2:242  0:001  not png, try icns
2:253  0:010  - [08]: 'EFI'
2:262  0:009  - [09]: 'muzins'
2:303  0:041  Scanning legacy ...
2:303  0:000   0: 'Whole Disc Boot' (legacy) not legacy
2:303  0:000   1: 'Whole Disc Boot' (vista,win) hidden
2:303  0:000   2: 'Whole Disc Boot' (legacy) not legacy
2:303  0:000   3: 'Whole Disc Boot' (legacy) not legacy
2:303  0:000   4: 'EFI' (legacy) not legacy
2:303  0:000   5: 'Macintosh HD' (legacy) not legacy
2:303  0:000   6: 'Recovery HD' (legacy) not legacy
2:303  0:000   7: 'Legacy HD1' (vista,win) add legacy
2:305  0:001          [!] Icon 18 (icons\vol_internal_ntfs.icns) not found (path: EFI\CLOVER\themes\newyear)
2:306  0:000   added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win
2:306  0:000   8: 'EFI' (legacy) not legacy
2:306  0:000   9: 'muzins' (legacy) not legacy
2:306  0:000  === [ AddCustomTool ] =====================================
2:307  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
2:307  0:000  Checking EFI partition Volume 4 for Clover
2:308  0:000   Found Clover
2:314  0:005  === [ GetEfiBootDeviceFromNvram ] =========================
2:314  0:000   - found entry 0. 'Boot macOS from Macintosh HD', Volume 'Macintosh HD', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0BC089E4-4255-4787-8291-5CC6B78E8544,0x64028,0xECE2340)\System\Library\CoreServices\boot.efi'
2:314  0:000  DefaultIndex=0 and MainMenu.EntryCount=9
2:314  0:000  Use anime=elka_1 frames=27
2:765  0:451  SelectionSmallFileName != NULL
2:766  0:001  SelectionBigFileName != NULL
2:783  0:016  GUI ready
11:716  8:933  EDITED: -v darkwake=0 nv_disable=1
12:809  1:092  ReinitSelfLib after theme change
12:809  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000)
12:809  0:000  === [ ScanVolumes ] =======================================
12:809  0:000  Found 10 volumes with blockIO
12:809  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
12:822  0:013  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
12:823  0:000          Result of bootcode detection: bootable Windows (vista,win)
12:823  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
12:823  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)
12:823  0:000          Found optical drive
12:823  0:000          This is SelfVolume !!
12:823  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000)
12:824  0:000          Result of bootcode detection: bootable unknown (legacy)
12:824  0:000          This is SelfVolume !!
12:824  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0BC089E4-4255-4787-8291-5CC6B78E8544,0x64028,0xECE2340)
12:825  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,6586770E-2391-4A34-B8DE-0CDE7BCFA104,0xED46368,0x135F20)
12:825  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,MBR,0xEB2AE76C,0x2,0x2542EAAE)
12:826  0:000          Result of bootcode detection: bootable Windows (vista,win)
12:826  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,AC3E78AC-E096-4631-88C2-0BC4E3EB1E4D,0x28,0x64000)
12:849  0:023          Result of bootcode detection: bootable unknown (legacy)
12:849  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,DAEFE7F6-8705-497C-8065-D073A2CC10AD,0x64028,0x15D466360)
12:849  0:000  Choosing theme newyear
12:849  0:000  found boot-args in NVRAM:nvda_drv=1, size=11
12:849  0:000  ...found arg:nvda_drv=1
12:849  0:000  ...adding arg:nvda_drv=1
12:850  0:000  after NVRAM boot-args=-v darkwake=0 nv_disable=1 nvda_drv=1 
12:850  0:000  === [ Dump SMC keys from NVRAM ] ==========================
12:850  0:000  found AppleSMC protocol
12:852  0:002     fakesmc-key-#KEY-ui32:00 00 00 11 
12:852  0:000     fakesmc-key-$Adr-ui32:00 00 03 00 
12:852  0:000     fakesmc-key-$Num-ui8:01 
12:852  0:000     fakesmc-key-RMde-char:41 
12:853  0:000     fakesmc-key-RPlt-ch8*:6B 35 00 00 00 00 00 00 
12:853  0:000     fakesmc-key-RBr -ch8*:6B 35 00 6A 31 37 00 00 
12:853  0:000     fakesmc-key-EPCI-ui32:02 C0 07 00 
12:853  0:000     fakesmc-key-REV -ch8*:01 39 0F 00 00 11 
12:853  0:000     fakesmc-key-BEMB-flag:00 
12:853  0:000     fakesmc-key-BATP-flag:00 
12:854  0:000     fakesmc-key-BNum-ui8:00 
12:854  0:000     fakesmc-key-MSTc-ui8:00 
12:854  0:000     fakesmc-key-MSAc-ui16:00 00 
12:854  0:000     fakesmc-key-MSLD-ui8:00 
12:854  0:000     fakesmc-key-MSWr-ui8:00 
12:854  0:000     fakesmc-key-MSFW-ui8:01 00 
12:854  0:000     fakesmc-key-MSPS-ui16:00 03 
12:857  0:002  === [ ScanLoader ] ========================================
12:857  0:000  - [04]: 'EFI'
12:867  0:009  - [05]: 'Macintosh HD'
12:867  0:000          AddLoaderEntry for Volume Name=Macintosh HD
12:870  0:002      Check if volume Is Hibernated:
12:870  0:000      Check sleep image 'by signature':
12:885  0:014      using default sleep image name = \private\var\vm\sleepimage
12:889  0:004      Reading first 512 bytes of sleepimage ...
12:889  0:000      OurBlockIoRead: Lba=2B24D10, Offset=5649A2000 (BlockSize=512)
12:889  0:000      sig lion: 74726150
12:889  0:000      sig snow: 74696D62
12:889  0:000      no valid sleep image offset was found
12:889  0:000      Reading completed -> Success
12:889  0:000       sleepimage offset could not be acquired
12:889  0:000      hibernated: no - sign
12:891  0:001  not png, try icns
12:900  0:009  - [06]: 'Recovery HD'
12:900  0:000          AddLoaderEntry for Volume Name=Recovery HD
12:901  0:000  not png, try icns
12:910  0:009  - [08]: 'EFI'
12:919  0:009  - [09]: 'muzins'
12:929  0:009  Scanning legacy ...
12:929  0:000   0: 'Whole Disc Boot' (legacy) not legacy
12:929  0:000   1: 'Whole Disc Boot' (vista,win) hidden
12:929  0:000   2: 'Whole Disc Boot' (legacy) not legacy
12:929  0:000   3: 'Whole Disc Boot' (legacy) not legacy
12:929  0:000   4: 'EFI' (legacy) not legacy
12:929  0:000   5: 'Macintosh HD' (legacy) not legacy
12:929  0:000   6: 'Recovery HD' (legacy) not legacy
12:929  0:000   7: 'Legacy HD1' (vista,win) add legacy
12:930  0:001   added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win
12:930  0:000   8: 'EFI' (legacy) not legacy
12:930  0:000   9: 'muzins' (legacy) not legacy
12:930  0:000  === [ AddCustomTool ] =====================================
12:930  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
12:930  0:000  Checking EFI partition Volume 4 for Clover
12:932  0:001   Found Clover
12:932  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
12:932  0:000   - found entry 0. 'Boot macOS from Macintosh HD', Volume 'Macintosh HD', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0BC089E4-4255-4787-8291-5CC6B78E8544,0x64028,0xECE2340)\System\Library\CoreServices\boot.efi'
12:932  0:000  DefaultIndex=0 and MainMenu.EntryCount=9
12:932  0:000  Use anime=elka_1 frames=27
13:344  0:411  selections ready
14:195  0:851  Set new BootOrder
14:195  0:000   7: Boot0000, Boot0082, Boot0083, Boot0080, Boot0081, Boot0088, Boot008C
14:195  0:000  === [ StartLoader ] =======================================
14:195  0:000  Finally: Bus=99768kHz CPU=3392MHz
14:195  0:000  Loading boot.efi  status=Success
14:520  0:325  GetOSVersion: 10.11.6 (15G31)
14:520  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_DISABLE_BASESYSTEM_VERIFICATION
14:520  0:000  === [ PatchSmbios ] =======================================
14:520  0:000  insert table 9 for dev 0:0
14:520  0:000  insert table 9 for dev 0:1
14:520  0:000  insert table 9 for dev 0:0
14:520  0:000  Channels: 2
14:520  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
14:520  0:000  SMBIOS Type 17 Index = 0 => 0 0:
14:520  0:000   DIMM1 1600MHz 8192MB
14:520  0:000  SMBIOS Type 17 Index = 1 => 2 2:
14:520  0:000   DIMM2 1600MHz 8192MB
14:520  0:000  SMBIOS Type 17 Index = 2 => 1 1:
14:520  0:000   DIMM3 1600MHz 8192MB
14:520  0:000  SMBIOS Type 17 Index = 3 => 3 3:
14:520  0:000   DIMM4 1600MHz 8192MB
14:520  0:000  mTotalSystemMemory = 32768
14:520  0:000  NumberOfMemoryDevices = 4
14:520  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
14:520  0:000  Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000
14:520  0:000  Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000
14:520  0:000  Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000
14:520  0:000  Table 131 is present, CPUType=35
14:520  0:000  Change to: 402
14:520  0:000  === [ PatchACPI ] =========================================
14:520  0:000  RSDT 0xDF07C028
14:520  0:000  FADT from RSDT: 0xDF07C100
14:520  0:000  XSDT 0xDF07C078
14:520  0:000  FADT from XSDT: 0xDF088998
14:520  0:000  Xsdt reallocation done
14:520  0:000  old FADT length=10C
14:520  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
14:522  0:001  Apply DsdtFixMask=0x00000000 old way
14:522  0:000     drop _DSM mask=0x0000
14:522  0:000  === [ FixBiosDsdt ] =======================================
14:522  0:000  VideoCard devID=0x17C810DE
14:522  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
14:522  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
14:522  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
14:646  0:124  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
14:646  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
14:646  0:000  first CPU found at 7DC9 offset 7DCC
14:646  0:000  score candidate at 7DC5
14:646  0:000  score inserted in acpi_cpu_score _PR_
14:646  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
14:646  0:000  Found PCIROOTUID = 0
14:646  0:000  === [ ACPIDropTables ] ====================================
14:646  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2776
14:646  0:000   Xsdt has tables count=10
14:646  0:000   Table: SSDT  CpuPm  2776 dropped
14:646  0:000  corrected XSDT length=108
14:646  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=1337
14:646  0:000   Xsdt has tables count=9
14:646  0:000   Table: SSDT  Cpu0Ist  1337 dropped
14:646  0:000  corrected XSDT length=100
14:646  0:000  === [ PatchAllSSDT ] ======================================
14:646  0:000  Patch table: SSDT  SataTabl
14:646  0:000   SSDT len = 0x36D
14:646  0:000  Patch table: SSDT  SaSsdt 
14:646  0:000   SSDT len = 0x34E1
14:646  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
14:646  0:000   Xsdt has tables count=8
14:646  0:000  corrected XSDT length=100
14:646  0:000  === [ ACPIPatchedAML ] ====================================
14:646  0:000  Start: Processing Patched AML(s): Unsorted
14:646  0:000  Inserting SSDT-1.AML from EFI\CLOVER\ACPI\patched ... Success
14:647  0:001  End: Processing Patched AML(s)
14:647  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
14:647  0:000  Maximum control=0x22
14:647  0:000  Turbo control=0x26
14:647  0:000  P-States: min 0x8, max 0x26
14:647  0:000  SSDT with CPU P-States generated successfully
14:647  0:000  SSDT with CPU C-States generated successfully
14:647  0:000  === [ RestSetup macOS ] ===================================
14:647  0:000  EdidDiscovered size=128
14:647  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  10  AC
14:647  0:000  010  |  6F  D0  4C  51  30  30  32  19  01  04
14:647  0:000  020  |  A5  37  1F  78  3E  44  55  A9  55  4D
14:647  0:000  030  |  9D  26  0F  50  54  A5  4B  00  B3  00
14:647  0:000  040  |  D1  00  71  4F  A9  40  81  80  77  80
14:647  0:000  050  |  01  01  01  01  56  5E  00  A0  A0  A0
14:647  0:000  060  |  29  50  30  20  35  00  29  37  21  00
14:647  0:000  070  |  00  1A  00  00  00  FF  00  44  39  4E
14:647  0:000  080  |  59  59  35  43  44  30  30  51  4C  0A
14:647  0:000  090  |  00  00  00  FC  00  44  45  4C  4C  20
14:647  0:000  100  |  55  32  35  31  35  48  0A  20  00  00
14:647  0:000  110  |  00  FD  00  38  56  1E  71  1E  01  0A
14:647  0:000  120  |  20  20  20  20  20  20  01  59
14:647  0:000  mem_detected 3366392342947823616
14:647  0:000  read_nVidia_ROM
14:647  0:000  Using PRAMIN fixups
14:813  0:165  PROM
15:021  0:208  version 84.00.32.00.5F
15:021  0:000  nVidia Zotac GeForce GTX 980 TI  2101346304MB NV120 [10DE:17C8] :: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0) => device #1
15:021  0:000  Nvidia: VideoPorts: undefined, default to: 2
15:021  0:000  default NVCAP: 04000000-00000600-79000000-00000007-00000000
15:021  0:000   setting specified layout-id=1 (0x1)
15:022  0:000  stringlength = 2186
15:022  0:000  CurrentMode: Width=1600 Height=1200
15:022  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D2F4EB98
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D2F4EB98
15:025  0:002  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
15:027  0:002    Extra kext: EFI\CLOVER\kexts\Other\AppleIntelE1000e.kext
15:034  0:006    Extra kext: EFI\CLOVER\kexts\Other\AtherosE2200Ethernet.kext
15:037  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
15:039  0:002    Extra kext: EFI\CLOVER\kexts\10.11\AppleGraphicsDevicePolicy.kext
15:043  0:003    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC_ACPISensors.kext
15:047  0:003    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC.kext
15:052  0:005    Extra kext: EFI\CLOVER\kexts\10.11\RealtekRTL8111.kext
15:061  0:009    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC_CPUSensors.kext
15:064  0:003    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC_GPUSensors.kext
15:068  0:003    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC_LPCSensors.kext
15:076  0:007    Extra kext: EFI\CLOVER\kexts\10.11\USBInjectAll.kext
15:089  0:013    Extra kext: EFI\CLOVER\kexts\10.11\NullCPUPowerManagement.kext
15:094  0:005  Custom boot screen not used because entry has unset use graphics

nv_disable=1 옵션 주었을때의 boot로그 입니다.

nvda_drv=1 옵션에서는 블랙아웃입니다.

웹드라이버 최신버젼이고 AGDPfix도 했습니다.

 

 

2일째 입니다....

 

참고로 제 다른 컴퓨터 4770 gtx970 b85m-d3h은 현재 시에라 10.12.2 전부다 깔리고 안정적으로 돌아가고 있습니다..

이 컴퓨터가 문제네요

팀뷰어는 뭐든 해결될때까지 하루종일 기다리고 있겠습니다.

부탁 좀 드립니다.

스크린샷 2017-01-26 오후 3.58.24.png

스크린샷 2017-01-26 오후 4.00.11.png

뭔가 잡힌거 같긴 한데.. 도저히 모르겠습니다.

미스터훈
1 Lv. 44/200P

댓글 6

참여를 하시면 세상을 바꿉니다.
profile image
1등 라자 2017.01.26. 17:25 |댓주소:#1447421
미스터훈

980ti,제온에다가 b85m 32G 램이 박혀있군요.

작업용이신?

 

일단 레거시로 부팅할려고 시도하고 있는 로그구요..

레거시 부팅이 아닌 ESP로 하실꺼같은데??

 

클로버로 ESP 부팅 채크가 되면 아래쪽에 설명이 나올겁니다.

F32로 포맷하는 터미널 명령 말이죠.

 

그리고 KEXT가 10.11 폴더에 박힌건가요? 10.12 거기 넣으셔야 할터인데요.

또한 nullcpupower kext 가 왜.. 있는지..

웹드라이버 쓰시면 AppleGraphicsDevicePolicy.kext 이거 지우세요.

댓글
미스터훈 작성자 2017.01.26. 18:59 |댓주소:#1447547
라자

네 답변 감사합니다.

작업용 컴퓨터 입니다. ㅠ

 

밑에 KEXT는 말씀하신대로 수정했고 10.11은 엘케피탄인데 10.12에 넣어야하나요?

 

그리고 위에 ESP 부팅 체크와 F32 터미널 명령은 무슨 말씀인지 잘 모르겠습니다. 

자세한 설명 부탁드려도 될까요?

 

0:100  0:100  MemLog inited, TSC freq: 3392145801
0:100  0:000  
0:100  0:000  Now is 26.1.2017,  9:40:10 (GMT)
0:100  0:000  Starting Clover revision: 3974 on American Megatrends EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.3 | XCODE: 8.2.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000) @D2F4EE98
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Samsung
0:100  0:000  SmbiosTable.Type17->SerialNumber = 13BDBF44
0:100  0:000  SmbiosTable.Type17->PartNumber = M378B1G73QH0-CK0  
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = Samsung
0:100  0:000  SmbiosTable.Type17->SerialNumber = 137C8D1D
0:100  0:000  SmbiosTable.Type17->PartNumber = M378B1G73EB0-CK0  
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Samsung
0:100  0:000  SmbiosTable.Type17->SerialNumber = 13BDB971
0:100  0:000  SmbiosTable.Type17->PartNumber = M378B1G73QH0-CK0  
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = Samsung
0:100  0:000  SmbiosTable.Type17->SerialNumber = 137C8747
0:100  0:000  SmbiosTable.Type17->PartNumber = M378B1G73EB0-CK0  
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'B85M-DS3H-A' with board 'B85M-DS3H-A'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=306C3
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  got cores from CPUID_1 = 0
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz
0:100  0:000  MSR 0xE2 before patch 1E000402
0:100  0:000  MSR 0xE4              00001814
0:100  0:000  MSR 0xCE              00080838_F7012200
0:100  0:000  non-usable FLEX_RATIO = 10000
0:100  0:000  corrected FLEX_RATIO = 0
0:100  0:000  FSBFrequency=105MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x3C/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 34.0/8
0:100  0:000  Turbo: 36/37/38/38
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 8
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3600 MHz
0:100  0:000  TSC: 3600 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0C08 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0C01 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 17C8 class=030000
0:100  0:000   - GFX: Model=Zotac GeForce GTX 980 TI family 120 (Nvidia)
0:100  0:000  PCI (00|01:00.01) : 10DE 0FB0 class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:14.00) : 8086 8C31 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 8C3A class=078000
0:100  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:100  0:000  PCI (00|00:1A.00) : 8086 8C2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 8C20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 8C10 class=060400
0:100  0:000  PCI (00|00:1C.02) : 8086 8C14 class=060400
0:100  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000
0:100  0:000   - LAN: 0 Vendor=Realtek
0:100  0:000  PCI (00|00:1D.00) : 8086 8C26 class=0C0320
0:100  0:000  PCI (00|00:1F.00) : 8086 8C50 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 8C02 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 8C22 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:102  0:001  EFI\CLOVER\config.plist loaded: Success
0:102  0:000  === [ GetListOfThemes ] ===================================
0:103  0:001  - [00]: EMBEDDED
0:105  0:002  - [00]: RANDOM
0:107  0:002  - [00]: christmas
0:110  0:003  - [01]: NEWYEAR
0:113  0:002  - [02]: BGM
0:121  0:007  - [03]: METAL
0:127  0:005  === [ Found config plists ] ===============================
0:127  0:000  - config.plist
0:127  0:000  === [ GetEarlyUserSettings ] ==============================
0:127  0:000  timeout set to 2
0:127  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:127  0:000  Default theme: newyear
0:127  0:000  Hiding entries with string Windows
0:127  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:127  0:000  Error in Early settings0: Not Found
0:127  0:000  === [ LoadDrivers ] =======================================
0:128  0:001  Loading AppleImageCodec-64.efi  status=Success
0:131  0:002  Loading AppleKeyAggregator-64.efi  status=Success
0:132  0:001  Loading AppleUITheme-64.efi  status=Success
0:134  0:001  Loading DataHubDxe-64.efi  status=Success
0:144  0:010  Loading FirmwareVolume-64.efi  status=Success
0:146  0:001  Loading FSInject-64.efi  status=Success
0:147  0:001  Loading OsxAptioFix2Drv-64.efi  status=Success
0:148  0:001  Loading OsxFatBinaryDrv-64.efi  status=Success
0:150  0:001  Loading SMCHelper-64.efi  status=Success
0:151  0:001  Loading VBoxHfs-64.efi  status=Success
0:153  0:001   - driver needs connecting
0:153  0:000  1 drivers needs connecting ...
0:153  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:153  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:271  0:118  === [ InitScreen ] ========================================
0:271  0:000  SetScreenResolution: 2560x1440 - not found!
0:271  0:000  SetMaxResolution: found best mode 4: 1600x1200
0:698  0:427  Video mode change to mode #4: Success
0:698  0:000   - set
0:698  0:000  Console modes reported: 5, available modes:
0:698  0:000   - [01]: 80x25 (current mode)
0:698  0:000   - [02]: 80x50
0:698  0:000   - [03]: 100x31
0:698  0:000   - [04]: 128x30
0:698  0:000   - [05]: 100x60
0:698  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000)
0:699  0:000  Using embedded font: Success
2:013  1:314  === [ GetMacAddress ] =====================================
2:013  0:000  MAC address of LAN #0= 40:8D:5C:26:F2:4F:
2:013  0:000  === [ ScanSPD ] ===========================================
2:013  0:000  SMBus device : 8086 8C22 class=0C0500 status=Success
2:013  0:000  SMBus CmdReg: 0x1
2:013  0:000  Scanning SMBus [8086:8C22], mmio: 0xF7215004, ioport: 0xF000, hostc: 0x11
2:013  0:000  Slots to scan [8]...
2:014  0:000  SPD[0]: Type 11 @0x50
2:032  0:017  DDR speed 1600MHz
2:032  0:000  Slot: 0 Type 24 8192MB 1600MHz Vendor=Samsung PartNo=M378B1G73QH0-CK0 SerialNo=01030B0D0B0F0404
2:032  0:000  SPD[1]: Type 11 @0x51
2:050  0:017  DDR speed 1600MHz
2:050  0:000  Slot: 1 Type 24 8192MB 1600MHz Vendor=Samsung PartNo=M378B1G73EB0-CK0 SerialNo=0103070C080D010D
2:051  0:000  SPD[2]: Type 11 @0x52
2:069  0:017  DDR speed 1600MHz
2:069  0:000  Slot: 2 Type 24 8192MB 1600MHz Vendor=Samsung PartNo=M378B1G73QH0-CK0 SerialNo=01030B0D0B090701
2:069  0:000  SPD[3]: Type 11 @0x53
2:087  0:017  DDR speed 1600MHz
2:087  0:000  Slot: 3 Type 24 8192MB 1600MHz Vendor=Samsung PartNo=M378B1G73EB0-CK0 SerialNo=0103070C08070407
2:088  0:000  === [ GetAcpiTablesList ] =================================
2:088  0:000  Get Acpi Tables List from RSDT:
2:088  0:000   - [00]: FACP  A M I len=132
2:088  0:000   - [01]: APIC  A M I len=146
2:088  0:000   - [02]: FPDT  A M I len=68
2:088  0:000   - [03]: SSDT  Cpu0Ist len=1337
2:088  0:000   - [04]: SSDT  CpuPm len=2776
2:088  0:000   - [05]: MCFG  A M I len=60
2:088  0:000   - [06]: HPET  A M I len=56
2:088  0:000   - [07]: SSDT  SataTabl len=877
2:088  0:000   - [08]: SSDT  SaSsdt  len=13537
2:088  0:000   - [09]: BGRT  A M I len=56
2:088  0:000  Calibrated TSC frequency =3392145801 =3392MHz
2:088  0:000  === [ GetUserSettings ] ===================================
2:088  0:000  USB FixOwnership: no
2:088  0:000  Dropping 3 tables:
2:088  0:000   - [00]: Drop table  signature="DMAR" (52414D44)
2:088  0:000           - set table: 52414D44,                0 to drop: no
2:088  0:000   - [01]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
2:088  0:000           - set table: 54445353,       6D50757043 to drop: yes
2:088  0:000   - [02]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
2:088  0:000           - set table: 54445353,   74734930757043 to drop: yes
2:088  0:000   - final DSDT Fix mask=00000000
2:088  0:000  MinMultiplier: 8
2:088  0:000  ChassisType: 0x6
2:088  0:000  CpuType: 402
2:102  0:014  === [ ScanVolumes ] =======================================
2:102  0:000  Found 10 volumes with blockIO
2:102  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
2:103  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
2:103  0:000          Result of bootcode detection: bootable Windows (vista,win)
2:103  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
2:104  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)
2:104  0:000          Found optical drive
2:104  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000)
2:104  0:000          Result of bootcode detection: bootable unknown (legacy)
2:113  0:008          This is SelfVolume !!
2:113  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0BC089E4-4255-4787-8291-5CC6B78E8544,0x64028,0xECE2340)
2:114  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,6586770E-2391-4A34-B8DE-0CDE7BCFA104,0xED46368,0x135F20)
2:114  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,MBR,0xEB2AE76C,0x2,0x2542EAAE)
2:115  0:000          Result of bootcode detection: bootable Windows (vista,win)
2:115  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,AC3E78AC-E096-4631-88C2-0BC4E3EB1E4D,0x28,0x64000)
2:116  0:000          Result of bootcode detection: bootable unknown (legacy)
2:127  0:011  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,DAEFE7F6-8705-497C-8065-D073A2CC10AD,0x64028,0x15D466360)
2:131  0:003  === [ InitTheme ] =========================================
2:132  0:001  Using theme 'newyear' (EFI\CLOVER\themes\newyear)
2:132  0:000  OS main and drive as badge
2:133  0:001  Loading font from ThemeDir: Success
2:133  0:000  Choosing theme newyear
2:133  0:000  found boot-args in NVRAM:nvda_drv=1, size=11
2:133  0:000  ...found arg:nvda_drv=1
2:133  0:000  after NVRAM boot-args=-v darkwake=0 nvda_drv=1 kext-dev-mode=1
2:133  0:000  === [ Dump SMC keys from NVRAM ] ==========================
2:133  0:000  found AppleSMC protocol
2:136  0:002     fakesmc-key-#KEY-ui32:00 00 00 11 
2:136  0:000     fakesmc-key-$Adr-ui32:00 00 03 00 
2:136  0:000     fakesmc-key-$Num-ui8:01 
2:136  0:000     fakesmc-key-RMde-char:41 
2:136  0:000     fakesmc-key-RPlt-ch8*:6B 35 00 00 00 00 00 00 
2:136  0:000     fakesmc-key-RBr -ch8*:6B 35 00 6A 31 37 00 00 
2:137  0:000     fakesmc-key-EPCI-ui32:02 C0 07 00 
2:137  0:000     fakesmc-key-REV -ch8*:01 39 0F 00 00 11 
2:137  0:000     fakesmc-key-BEMB-flag:00 
2:137  0:000     fakesmc-key-BATP-flag:00 
2:137  0:000     fakesmc-key-BNum-ui8:00 
2:137  0:000     fakesmc-key-MSTc-ui8:00 
2:137  0:000     fakesmc-key-MSAc-ui16:00 00 
2:137  0:000     fakesmc-key-MSLD-ui8:00 
2:138  0:000     fakesmc-key-MSWr-ui8:00 
2:138  0:000     fakesmc-key-MSFW-ui8:01 00 
2:138  0:000     fakesmc-key-MSPS-ui16:00 03 
2:141  0:002  === [ ScanLoader ] ========================================
2:141  0:000  - [04]: 'EFI'
2:155  0:014  - [05]: 'Macintosh HD'
2:162  0:006          AddLoaderEntry for Volume Name=Macintosh HD
2:165  0:002      Check if volume Is Hibernated:
2:165  0:000      Check sleep image 'by signature':
2:179  0:014      using default sleep image name = \private\var\vm\sleepimage
2:184  0:004      Reading first 512 bytes of sleepimage ...
2:184  0:000      OurBlockIoRead: Lba=2B24D10, Offset=5649A2000 (BlockSize=512)
2:184  0:000      sig lion: 74726150
2:184  0:000      sig snow: 74696D62
2:184  0:000      no valid sleep image offset was found
2:184  0:000      Reading completed -> Success
2:184  0:000       sleepimage offset could not be acquired
2:184  0:000      hibernated: no - sign
2:186  0:001  not png, try icns
2:197  0:010  - [06]: 'Recovery HD'
2:198  0:001          AddLoaderEntry for Volume Name=Recovery HD
2:199  0:001  not png, try icns
2:210  0:010  - [08]: 'EFI'
2:219  0:009  - [09]: 'muzins'
2:260  0:041  Scanning legacy ...
2:260  0:000   0: 'Whole Disc Boot' (legacy) not legacy
2:260  0:000   1: 'Whole Disc Boot' (vista,win) hidden
2:260  0:000   2: 'Whole Disc Boot' (legacy) not legacy
2:260  0:000   3: 'Whole Disc Boot' (legacy) not legacy
2:260  0:000   4: 'EFI' (legacy) not legacy
2:260  0:000   5: 'Macintosh HD' (legacy) not legacy
2:260  0:000   6: 'Recovery HD' (legacy) not legacy
2:260  0:000   7: 'Legacy HD1' (vista,win) add legacy
2:262  0:001          [!] Icon 18 (icons\vol_internal_ntfs.icns) not found (path: EFI\CLOVER\themes\newyear)
2:263  0:000   added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win
2:263  0:000   8: 'EFI' (legacy) not legacy
2:263  0:000   9: 'muzins' (legacy) not legacy
2:263  0:000  === [ AddCustomTool ] =====================================
2:265  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
2:265  0:000  Checking EFI partition Volume 4 for Clover
2:266  0:000   Found Clover
2:271  0:005  === [ GetEfiBootDeviceFromNvram ] =========================
2:271  0:000   - found entry 0. 'Boot macOS from Macintosh HD', Volume 'Macintosh HD', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0BC089E4-4255-4787-8291-5CC6B78E8544,0x64028,0xECE2340)\System\Library\CoreServices\boot.efi'
2:271  0:000  DefaultIndex=0 and MainMenu.EntryCount=9
2:271  0:000  Use anime=elka_1 frames=27
2:722  0:450  SelectionSmallFileName != NULL
2:724  0:001  SelectionBigFileName != NULL
2:740  0:016  GUI ready
11:270  8:529  EDITED: -v darkwake=0 nv_disable=1
11:459  0:188  ReinitSelfLib after theme change
11:459  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000)
11:459  0:000  === [ ScanVolumes ] =======================================
11:459  0:000  Found 10 volumes with blockIO
11:459  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
11:472  0:013  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
11:473  0:000          Result of bootcode detection: bootable Windows (vista,win)
11:473  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)
11:473  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0xFFFF,0x0)
11:473  0:000          Found optical drive
11:473  0:000          This is SelfVolume !!
11:473  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,5FA71BED-97B3-4D1F-94E7-D8D9FFBB4C29,0x28,0x64000)
11:474  0:000          Result of bootcode detection: bootable unknown (legacy)
11:474  0:000          This is SelfVolume !!
11:474  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0BC089E4-4255-4787-8291-5CC6B78E8544,0x64028,0xECE2340)
11:474  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,6586770E-2391-4A34-B8DE-0CDE7BCFA104,0xED46368,0x135F20)
11:475  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,MBR,0xEB2AE76C,0x2,0x2542EAAE)
11:475  0:000          Result of bootcode detection: bootable Windows (vista,win)
11:475  0:000  - [08]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(1,GPT,AC3E78AC-E096-4631-88C2-0BC4E3EB1E4D,0x28,0x64000)
11:507  0:031          Result of bootcode detection: bootable unknown (legacy)
11:507  0:000  - [09]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x4,0xFFFF,0x0)\HD(2,GPT,DAEFE7F6-8705-497C-8065-D073A2CC10AD,0x64028,0x15D466360)
11:507  0:000  Choosing theme newyear
11:507  0:000  found boot-args in NVRAM:nvda_drv=1, size=11
11:507  0:000  ...found arg:nvda_drv=1
11:507  0:000  ...adding arg:nvda_drv=1
11:507  0:000  after NVRAM boot-args=-v darkwake=0 nv_disable=1 nvda_drv=1 
11:507  0:000  === [ Dump SMC keys from NVRAM ] ==========================
11:507  0:000  found AppleSMC protocol
11:510  0:002     fakesmc-key-#KEY-ui32:00 00 00 11 
11:510  0:000     fakesmc-key-$Adr-ui32:00 00 03 00 
11:510  0:000     fakesmc-key-$Num-ui8:01 
11:510  0:000     fakesmc-key-RMde-char:41 
11:510  0:000     fakesmc-key-RPlt-ch8*:6B 35 00 00 00 00 00 00 
11:510  0:000     fakesmc-key-RBr -ch8*:6B 35 00 6A 31 37 00 00 
11:511  0:000     fakesmc-key-EPCI-ui32:02 C0 07 00 
11:511  0:000     fakesmc-key-REV -ch8*:01 39 0F 00 00 11 
11:511  0:000     fakesmc-key-BEMB-flag:00 
11:511  0:000     fakesmc-key-BATP-flag:00 
11:511  0:000     fakesmc-key-BNum-ui8:00 
11:511  0:000     fakesmc-key-MSTc-ui8:00 
11:511  0:000     fakesmc-key-MSAc-ui16:00 00 
11:512  0:000     fakesmc-key-MSLD-ui8:00 
11:512  0:000     fakesmc-key-MSWr-ui8:00 
11:512  0:000     fakesmc-key-MSFW-ui8:01 00 
11:512  0:000     fakesmc-key-MSPS-ui16:00 03 
11:515  0:002  === [ ScanLoader ] ========================================
11:515  0:000  - [04]: 'EFI'
11:524  0:009  - [05]: 'Macintosh HD'
11:525  0:000          AddLoaderEntry for Volume Name=Macintosh HD
11:527  0:002      Check if volume Is Hibernated:
11:527  0:000      Check sleep image 'by signature':
11:542  0:014      using default sleep image name = \private\var\vm\sleepimage
11:546  0:004      Reading first 512 bytes of sleepimage ...
11:547  0:000      OurBlockIoRead: Lba=2B24D10, Offset=5649A2000 (BlockSize=512)
11:547  0:000      sig lion: 74726150
11:547  0:000      sig snow: 74696D62
11:547  0:000      no valid sleep image offset was found
11:547  0:000      Reading completed -> Success
11:547  0:000       sleepimage offset could not be acquired
11:547  0:000      hibernated: no - sign
11:548  0:001  not png, try icns
11:558  0:009  - [06]: 'Recovery HD'
11:558  0:000          AddLoaderEntry for Volume Name=Recovery HD
11:558  0:000  not png, try icns
11:567  0:009  - [08]: 'EFI'
11:576  0:009  - [09]: 'muzins'
11:586  0:009  Scanning legacy ...
11:586  0:000   0: 'Whole Disc Boot' (legacy) not legacy
11:586  0:000   1: 'Whole Disc Boot' (vista,win) hidden
11:586  0:000   2: 'Whole Disc Boot' (legacy) not legacy
11:586  0:000   3: 'Whole Disc Boot' (legacy) not legacy
11:586  0:000   4: 'EFI' (legacy) not legacy
11:586  0:000   5: 'Macintosh HD' (legacy) not legacy
11:586  0:000   6: 'Recovery HD' (legacy) not legacy
11:586  0:000   7: 'Legacy HD1' (vista,win) add legacy
11:588  0:001   added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win
11:588  0:000   8: 'EFI' (legacy) not legacy
11:588  0:000   9: 'muzins' (legacy) not legacy
11:588  0:000  === [ AddCustomTool ] =====================================
11:588  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
11:588  0:000  Checking EFI partition Volume 4 for Clover
11:589  0:001   Found Clover
11:589  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
11:589  0:000   - found entry 0. 'Boot macOS from Macintosh HD', Volume 'Macintosh HD', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,0BC089E4-4255-4787-8291-5CC6B78E8544,0x64028,0xECE2340)\System\Library\CoreServices\boot.efi'
11:589  0:000  DefaultIndex=0 and MainMenu.EntryCount=9
11:589  0:000  Use anime=elka_1 frames=27
12:004  0:414  selections ready
14:901  2:897  Set new BootOrder
14:901  0:000   7: Boot0000, Boot0082, Boot0083, Boot0080, Boot0081, Boot0088, Boot008C
14:901  0:000  === [ StartLoader ] =======================================
14:901  0:000  Finally: Bus=99768kHz CPU=3392MHz
14:901  0:000  Loading boot.efi  status=Success
15:226  0:324  GetOSVersion: 10.11.6 (15G31)
15:226  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_DISABLE_BASESYSTEM_VERIFICATION
15:226  0:000  === [ PatchSmbios ] =======================================
15:226  0:000  insert table 9 for dev 0:0
15:226  0:000  insert table 9 for dev 0:1
15:226  0:000  insert table 9 for dev 0:0
15:226  0:000  Channels: 2
15:226  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
15:226  0:000  SMBIOS Type 17 Index = 0 => 0 0:
15:226  0:000   DIMM1 1600MHz 8192MB
15:226  0:000  SMBIOS Type 17 Index = 1 => 2 2:
15:226  0:000   DIMM2 1600MHz 8192MB
15:226  0:000  SMBIOS Type 17 Index = 2 => 1 1:
15:226  0:000   DIMM3 1600MHz 8192MB
15:226  0:000  SMBIOS Type 17 Index = 3 => 3 3:
15:226  0:000   DIMM4 1600MHz 8192MB
15:226  0:000  mTotalSystemMemory = 32768
15:226  0:000  NumberOfMemoryDevices = 4
15:226  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
15:226  0:000  Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000
15:226  0:000  Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000
15:226  0:000  Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000
15:226  0:000  Table 131 is present, CPUType=35
15:226  0:000  Change to: 402
15:226  0:000  === [ PatchACPI ] =========================================
15:226  0:000  RSDT 0xDF07C028
15:226  0:000  FADT from RSDT: 0xDF07C100
15:226  0:000  XSDT 0xDF07C078
15:226  0:000  FADT from XSDT: 0xDF088998
15:226  0:000  Xsdt reallocation done
15:226  0:000  old FADT length=10C
15:226  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
15:227  0:001  Apply DsdtFixMask=0x00000000 old way
15:227  0:000     drop _DSM mask=0x0000
15:227  0:000  === [ FixBiosDsdt ] =======================================
15:227  0:000  VideoCard devID=0x17C810DE
15:227  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
15:228  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
15:228  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
15:352  0:124  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
15:352  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
15:352  0:000  first CPU found at 7DC9 offset 7DCC
15:352  0:000  score candidate at 7DC5
15:352  0:000  score inserted in acpi_cpu_score _PR_
15:352  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
15:352  0:000  Found PCIROOTUID = 0
15:352  0:000  === [ ACPIDropTables ] ====================================
15:352  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2776
15:352  0:000   Xsdt has tables count=10
15:352  0:000   Table: SSDT  CpuPm  2776 dropped
15:352  0:000  corrected XSDT length=108
15:352  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=1337
15:352  0:000   Xsdt has tables count=9
15:352  0:000   Table: SSDT  Cpu0Ist  1337 dropped
15:352  0:000  corrected XSDT length=100
15:352  0:000  === [ PatchAllSSDT ] ======================================
15:352  0:000  Patch table: SSDT  SataTabl
15:352  0:000   SSDT len = 0x36D
15:352  0:000  Patch table: SSDT  SaSsdt 
15:352  0:000   SSDT len = 0x34E1
15:352  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
15:352  0:000   Xsdt has tables count=8
15:352  0:000  corrected XSDT length=100
15:352  0:000  === [ ACPIPatchedAML ] ====================================
15:352  0:000  Start: Processing Patched AML(s): Unsorted
15:352  0:000  Inserting SSDT-1.AML from EFI\CLOVER\ACPI\patched ... Success
15:353  0:001  End: Processing Patched AML(s)
15:353  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
15:353  0:000  Maximum control=0x22
15:353  0:000  Turbo control=0x26
15:353  0:000  P-States: min 0x8, max 0x26
15:353  0:000  SSDT with CPU P-States generated successfully
15:353  0:000  SSDT with CPU C-States generated successfully
15:353  0:000  === [ RestSetup macOS ] ===================================
15:353  0:000  EdidDiscovered size=128
15:353  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  10  AC
15:353  0:000  010  |  6F  D0  4C  51  30  30  32  19  01  04
15:353  0:000  020  |  A5  37  1F  78  3E  44  55  A9  55  4D
15:353  0:000  030  |  9D  26  0F  50  54  A5  4B  00  B3  00
15:353  0:000  040  |  D1  00  71  4F  A9  40  81  80  77  80
15:353  0:000  050  |  01  01  01  01  56  5E  00  A0  A0  A0
15:353  0:000  060  |  29  50  30  20  35  00  29  37  21  00
15:353  0:000  070  |  00  1A  00  00  00  FF  00  44  39  4E
15:353  0:000  080  |  59  59  35  43  44  30  30  51  4C  0A
15:353  0:000  090  |  00  00  00  FC  00  44  45  4C  4C  20
15:353  0:000  100  |  55  32  35  31  35  48  0A  20  00  00
15:353  0:000  110  |  00  FD  00  38  56  1E  71  1E  01  0A
15:353  0:000  120  |  20  20  20  20  20  20  01  59
15:353  0:000  mem_detected 3366392342947823616
15:353  0:000  read_nVidia_ROM
15:353  0:000  Using PRAMIN fixups
15:519  0:165  PROM
15:727  0:208  version 84.00.32.00.5F
15:727  0:000  nVidia Zotac GeForce GTX 980 TI  2101346304MB NV120 [10DE:17C8] :: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0) => device #1
15:727  0:000  Nvidia: VideoPorts: undefined, default to: 2
15:727  0:000  default NVCAP: 04000000-00000600-79000000-00000007-00000000
15:727  0:000   setting specified layout-id=1 (0x1)
15:728  0:000  stringlength = 2186
15:728  0:000  CurrentMode: Width=1600 Height=1200
15:728  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D2F4EB98
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: D2F4EB98
15:731  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
15:733  0:002    Extra kext: EFI\CLOVER\kexts\Other\AppleIntelE1000e.kext
15:740  0:006    Extra kext: EFI\CLOVER\kexts\Other\AtherosE2200Ethernet.kext
15:743  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
15:746  0:002    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC_ACPISensors.kext
15:750  0:003    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC.kext
15:754  0:004    Extra kext: EFI\CLOVER\kexts\10.11\RealtekRTL8111.kext
15:764  0:009    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC_CPUSensors.kext
15:767  0:003    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC_GPUSensors.kext
15:771  0:003    Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC_LPCSensors.kext
15:778  0:007    Extra kext: EFI\CLOVER\kexts\10.11\USBInjectAll.kext
15:792  0:013  Custom boot screen not used because entry has unset use graphics

 

로그파일입니다.

 

댓글
profile image
라자 2017.01.27. 12:24 |댓주소:#1448481
미스터훈

 

흠.. 흠.. 엘케피탄인지 몰랐네요..ㅋ...ㅠ.ㅠ

10.11 폴더에 kext 넣는게 맞습니다.

 

OsxAptioFix2Drv-64.efi

이거 말고

OsxAptioFixDrv-64.efi

이걸 하는게 맞을겁니다.

스크린샷 2017-01-27 오후 12.18.21.png

EFI 아래의 ESP 설치는

클로버를 설치하다가 보면 아래쪽에..

스크린샷 2017-01-27 오후 12.18.34.png

diskutil list 해서 설치할 메인하드의 EFI 파티션을 찾은 다음에

그 아래 명령으로 FAT32로 포맷해 줍니다.

이유는 아주간단한데.. FAT32로 포맷하면 권한 설정을 할 필요가 없습니다. 강 복사해서 넣으면 알아서 읽혀요.

그리고 원도우 듀얼 부팅할때도 편하게 쓸수 있죠.

 

drivers64UEFI 폴더 안에 HFSPlus.efi 넣어둬야 할겁니다.

HFSPlus.efi.zip

 

댓글
미스터훈 작성자 2017.01.27. 02:09 |댓주소:#1448219
답변 감사합니다.
Nvidia web도 체크해보고 다 해봤습니다만 ㅠ
그래픽은 당연히 16소캣에 꽂혀있습니다. 저 보드는 16소캣이 하나밖에 없어서요.
그 부분이 뭔가 잘못된걸까요?
댓글
권한이 없습니다. 로그인

신고

"님의 댓글"

이 댓글을 신고 하시겠습니까?

삭제

"님의 댓글"

이 댓글을 삭제하시겠습니까?