안녕하세요.
AppleIntelInfo.kext 2.9 입니다.
https://github.com/Piker-Alpha/AppleIntelInfo
Source code 다운받아서 직접 xcode 로 컴파일했습니다.
다운로드 : AppleIntelInfo_2.9.zip
먼저 압축을 풀어주세요.
---------- 터미널 명령어 ----------
cd Downloads
sudo chown -R 0:0 AppleIntelInfo.kext
sudo kextload AppleIntelInfo.kext
sudo cat /tmp/AppleIntelInfo.dat
-------- kext load 취소 명령어 ----- sudo kextunload AppleIntelInfo.kext ----------------------------------
암호입력하라고 하면 본인 계정의 암호 입력을 하셔야합니다.
취소(언로드)명령어는 재부팅하면 리셋되기때문에 굳이 안하셔도 됩니다.
의미 없는 제 스피드 스텝 입니다.
HighSierra 10.13(17A365)
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.
Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0xbf692929d1a (597 MHz)
MWAIT C-States...........................: 135456
Processor Brandstring....................: Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz
Processor Signature..................... : 0x206D7
------------------------------------------
- Family............................... : 6
- Stepping............................. : 7
- Model................................ : 0x2D (45)
Model Specific Registers (MSRs)
------------------------------------------
MSR_IA32_PLATFORM_ID.............(0x17) : 0x0
------------------------------------------
- Processor Flags...................... : 0
MSR_CORE_THREAD_COUNT............(0x35) : 0x80010
------------------------------------------
- Core Count........................... : 8
- Thread Count......................... : 16
MSR_PLATFORM_INFO................(0xCE) : 0xC0064011600
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x16 (2200 MHz)
- Ratio Limit for Turbo Mode........... : 0 (not programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 0 (LMP not supported)
- Number of ConfigTDP Levels........... : 0 (only base TDP level available)
- Maximum Efficiency Ratio............. : 12
MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x1E008407
------------------------------------------
- I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
- CFG Lock............................. : 1 (MSR locked until next reset)
- C3 State Auto Demotion............... : 1 (enabled)
- C1 State Auto Demotion............... : 1 (enabled)
- C3 State Undemotion.................. : 1 (enabled)
- C1 State Undemotion.................. : 1 (enabled)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)
MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414
------------------------------------------
- LVL_2 Base Address................... : 0x414
- C-state Range........................ : 1 (C6 is the max C-State to include)
IA32_MPERF.......................(0xE7) : 0x10575171012
IA32_APERF.......................(0xE8) : 0x29CC29B7AD7
MSR_FLEX_RATIO...................(0x194) : 0x0
------------------------------------------
MSR_IA32_PERF_STATUS.............(0x198) : 0x221B00001D00
------------------------------------------
- Current Performance State Value...... : 0x1D00 (2900 MHz)
MSR_IA32_PERF_CONTROL............(0x199) : 0x1E00
------------------------------------------
- Target performance State Value....... : 0x1E00 (3000 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)
IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_INTERRUPT.............(0x19B) : 0x0
IA32_THERM_STATUS................(0x19C) : 0x882E0000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 46
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)
MSR_THERM2_CTL...................(0x19D) : 0x0
IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)
MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x5A0A00
------------------------------------------
- Turbo Attenuation Units.............. : 0
- Temperature Target................... : 90
- TCC Activation Offset................ : 0
MSR_MISC_PWR_MGMT................(0x1AA) : 0x1
------------------------------------------
- EIST Hardware Coordination........... : 1 (hardware coordination disabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 0 (thermal interrupt not rerouted)
- SpeedShift Technology Enable......... : 0 (disabled)
- SpeedShift Interrupt Coordination.... : 0 (disabled)
- SpeedShift Energy Efficient Perf..... : 0 (disabled)
- SpeedShift Technology Setup for HWP.. : No (not setup for HWP)
MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1B1B1C1C1D1D1E1E
------------------------------------------
- Maximum Ratio Limit for C01.......... : 1E (3000 MHz)
- Maximum Ratio Limit for C02.......... : 1E (3000 MHz)
- Maximum Ratio Limit for C03.......... : 1D (2900 MHz)
- Maximum Ratio Limit for C04.......... : 1D (2900 MHz)
- Maximum Ratio Limit for C05.......... : 1C (2800 MHz)
- Maximum Ratio Limit for C06.......... : 1C (2800 MHz)
- Maximum Ratio Limit for C07.......... : 1B (2700 MHz)
- Maximum Ratio Limit for C08.......... : 1B (2700 MHz)
IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x0
MSR_POWER_CTL....................(0x1FC) : 0x2504005B
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)
MSR_RAPL_POWER_UNIT..............(0x606) : 0xA1003
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 16 (15.3 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)
MSR_PKG_POWER_LIMIT..............(0x610) : 0x5EFFD0005EEA82
------------------------------------------
- Package Power Limit #1............... : 3408 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 0 (disabled)
- Time Window for Power Limit #1....... : 47 (163840 milli-Seconds)
- Package Power Limit #2............... : 4090 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 0 (disabled)
- Time Window for Power Limit #2....... : 47 (163840 milli-Seconds)
- Lock................................. : 0 (MSR not locked)
MSR_PKG_ENERGY_STATUS............(0x611) : 0x8B1B24E8
------------------------------------------
- Total Energy Consumed................ : 35611 Joules (Watt = Joules / seconds)
MSR_PP0_POWER_LIMIT..............(0x638) : 0x5EFFD0
------------------------------------------
- Power Limit.......................... : 4090 Watt
- Enable Power Limit................... : 1 (enabled)
- Clamping Limitation.................. : 0 (disabled)
- Time Window for Power Limit.......... : 47 (655360 milli-Seconds)
- Lock................................. : 0 (MSR not locked)
MSR_PP0_ENERGY_STATUS............(0x639) : 0xCF4E64F
------------------------------------------
- Total Energy Consumed................ : 3316 Joules (Watt = Joules / seconds)
MSR_PP0_POWER_LIMIT..............(0x638) : 0x5EFFD0
------------------------------------------
- Power Limit.......................... : 4090 Watt
- Enable Power Limit................... : 1 (enabled)
- Clamping Limitation.................. : 0 (disabled)
- Time Window for Power Limit.......... : 47 (655360 milli-Seconds)
- Lock................................. : 0 (MSR not locked)
MSR_PP0_ENERGY_STATUS............(0x639) : 0xCF4EB5C
------------------------------------------
- Total Energy Consumed................ : 3316 Joules (Watt = Joules / seconds)
MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKGC7_IRTL...................(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x34BAB6D05C8
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0xF663EB6C4
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x34BAB6D05C8
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0xF663EB6C4
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x3180288662C
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
IA32_TSC_DEADLINE................(0x6E0) : 0xBF6953FAABD
CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 22 (2200 MHz)
Maximum Turbo Ratio/Frequency............: 30 (3000 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ 28 (29) ]
CPU C3-Cores [ 5 7 10 13 15 ]
CPU C6-Cores [ 2 3 4 7 8 9 11 12 14 ]
CPU P-States [ (13) 25 28 29 ]
CPU C3-Cores [ 1 5 6 7 10 11 13 15 ]
CPU C6-Cores [ 0 2 3 4 7 8 9 11 12 13 14 ]
CPU P-States [ (13) 21 25 28 29 ]
CPU C3-Cores [ 1 4 5 6 7 10 11 12 13 15 ]
CPU C6-Cores [ 0 1 2 3 4 6 7 8 9 10 11 12 13 14 15 ]
CPU P-States [ (12) 13 21 22 25 28 29 ]
CPU P-States [ 12 (13) 21 22 24 25 28 29 ]
CPU C3-Cores [ 1 4 5 6 7 10 11 12 13 14 15 ]
CPU C3-Cores [ 1 2 3 4 5 6 7 10 11 12 13 14 15 ]
CPU P-States [ 12 (13) 21 22 23 24 25 28 29 ]
CPU C3-Cores [ 1 2 3 4 5 6 7 9 10 11 12 13 14 15 ]
CPU P-States [ 12 (13) 19 21 22 23 24 25 28 29 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
CPU P-States [ 12 (13) 19 21 22 23 24 25 26 28 29 ]
CPU P-States [ 12 13 19 21 22 23 24 25 26 27 28 (29) ]
CPU P-States [ 12 13 19 21 22 23 24 25 26 27 28 29 (30) ]
CPU P-States [ (12) 13 19 20 21 22 23 24 25 26 27 28 29 30 ]
CPU P-States [ 12 (13) 18 19 20 21 22 23 24 25 26 27 28 29 30 ]
CPU P-States [ 12 (13) 15 18 19 20 21 22 23 24 25 26 27 28 29 30 ]
CPU P-States [ 12 (13) 15 16 18 19 20 21 22 23 24 25 26 27 28 29 30 ]
CPU P-States [ 12 (13) 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ]
CPU P-States [ 12 (13) 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ]
최저 배수가 16이면 1.6기가부터 3.3기가까지 동작한다는 것인데 저배수로 작동할수도 있으니 보인 시퓨 최저 클럭이 몇인지 확인해보세요
시퓨 최저클럭은 샌디i5-2500 이라서 1.6g 맞긴합니다...
스피드스텝 잔랙이 느껴져서 C1E만 활성화해놓고 썼는데..
인텔파워가젯으로 보니까 전력량 차이가 의외로 많이 나서...
절전모드가 전혀 사용안되고 있었던것 같아요.. 클럭만 1.6하고 3.3 변동하고..
"님의 댓글"
이 댓글을 신고 하시겠습니까?
제목 | 조회 수 | 날짜 | 글쓴이 |
---|---|---|---|
macOS Sequoia 15.0.1 24A348 정식버젼 고스트 이미지 OC 1.0.2 ft: 전체공개 +29 | 938 | 24.10.1121:10 | 좌절금지 |
오픈코어 1.0.2 +23 | 575 | 24.10.0900:22 | 줌바이퍼 |
[중급편] 노트북 해킨 +16 | 1403 | 24.07.1219:19 | Stultus |
macOS Ventura 13.7 22H123 정식버젼 고스트 이미지 OC 1.0.1 ft: 전체 공개 +17 | 575 | 24.09.1917:09 | 좌절금지 |
macOS Sonoma 14.7 23H124 정식버젼 고스트 이미지 OC 1.0.1 ft: 전체공개 +31 | 909 | 24.09.1723:58 | 좌절금지 |
[초급편] 문제 스스로 해결하기 +20 | 4003 | 24.03.2920:07 | Stultus |
[입문편] 첫 해킨 길라잡이 +40 | 5087 | 24.01.1218:54 | Stultus |
[필독 - 안정화] macOS 해킨토시 설치 후 안정화 작업 목록 및 글타래 모음 총정리 📋 +67 | 5.1만 | 23.01.0913:39 | shl628 |
Hot AMD Sequoia용 AppleALC 1.9.2 +3 | 107 | 24.10.2319:04 | 사노라맨 |
Hot [Sequoia 15.0.1, OC r1.0.2] ASUS TUF B550-PLUS / RYZEN 5 5600X / RX470 +2 | 103 | 24.10.2322:26 | 뿌엥 |
Hot OCLP로 지원되지 않는 기기/dGPU를 사용하는 해킨토시의 사이드카 품질 문제 해결방법 +1 | 120 | 24.10.2321:29 | 해킨도전자 |
344 | 24.10.1222:56 | Stultus | |
733 | 24.10.1115:53 | 수박 | |
994 | 24.09.2210:59 | 좌절금지 | |
575 | 24.09.1917:09 | 좌절금지 | |
909 | 24.09.1723:58 | 좌절금지 | |
572 | 24.08.0606:14 | 줌바이퍼 | |
883 | 24.08.0521:08 | 좌절금지 | |
2438 | 24.02.1715:21 | 광호 | |
391 | 24.06.1401:04 | Mactopia | |
118만 | 23.02.2118:35 | 좌절금지 | |
266 | 24.05.2520:14 | RogerT | |
1017 | 24.05.1812:40 | 좌절금지 | |
1073 | 24.05.1002:04 | 줌바이퍼 | |
152 | 24.05.0319:15 | 챠니앤차니 | |
186 | 24.05.0220:17 | 챠니앤차니 | |
1291 | 24.04.1302:33 | won | |
2859 | 24.04.0216:42 | 좌절금지 | |
2943 | 24.03.3021:40 | 좌절금지 | |
975 | 24.01.2600:53 | 좌절금지 | |
1023 | 24.03.0813:06 | 좌절금지 | |
872 | 24.03.1309:31 | hosoo | |
927 | 24.03.1203:44 | 줌바이퍼 | |
1089 | 24.02.0913:58 | 좌절금지 | |
544 | 24.02.0800:43 | bluesaza | |
681 | 24.02.0600:57 | 줌바이퍼 | |
379 | 24.02.0420:34 | 해킨도전자 | |
768 | 24.01.2812:47 | 좌절금지 | |
732 | 24.01.2316:31 | 좌절금지 | |
473 | 24.01.1500:21 | Mactopia | |
1.7만 | 23.04.0510:58 | 좌절금지 | |
739 | 24.01.0813:46 | 해킨도전자 | |
220 | 24.01.1023:54 | bluesaza | |
6662 | 23.09.2812:33 | 좌절금지 | |
2806 | 23.12.2509:20 | 좌절금지 | |
1170 | 23.12.3007:41 | june119 | |
1972 | 23.12.2509:09 | 좌절금지 | |
1.4만 | 23.07.2619:37 | 좌절금지 | |
3000 | 23.12.1202:57 | 줌바이퍼 | |
2575 | 23.12.1111:28 | GOMHEAD | |
5345 | 23.10.2623:19 | 좌절금지 | |
3885 | 23.11.1222:19 | Mactopia | |
3138 | 23.11.1123:40 | bluesaza | |
3810 | 23.11.0700:25 | 줌바이퍼 | |
6.1만 | 23.03.2910:27 | 좌절금지 | |
4514 | 23.10.1713:08 | 빗소리들으며 | |
4418 | 23.10.0301:02 | 애플맨 | |
3851 | 23.09.2801:26 | bluesaza | |
5164 | 23.09.2723:30 | gooris | |
4538 | 23.09.2312:56 | 좌절금지 | |
3368 | 23.09.2312:13 | 좌절금지 |
ssdt까지 넣어주긴했는데 잘 잡힌건지 모르겠네요
CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 16 (1600 MHz)
Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz)
Maximum Ratio/Frequency..................: 33 (3300 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (16) 32 33 ]
CPU C3-Cores [ 0 1 ]
CPU C6-Cores [ 0 1 3 ]
CPU P-States [ (16) 19 32 33 ]
CPU P-States [ (16) 19 26 32 33 ]
CPU C3-Cores [ 0 1 2 3 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU P-States [ (16) 19 26 29 32 33 ]
CPU P-States [ 16 19 26 29 30 32 (33) ]
CPU P-States [ (16) 19 26 29 30 31 32 33 ]
CPU P-States [ (16) 19 22 26 29 30 31 32 33 ]
CPU P-States [ (16) 19 22 26 28 29 30 31 32 33 ]
CPU P-States [ (16) 19 20 22 26 28 29 30 31 32 33 ]
CPU P-States [ (16) 19 20 22 26 27 28 29 30 31 32 33 ]
CPU P-States [ (16) 19 20 22 24 26 27 28 29 30 31 32 33 ]
CPU P-States [ (16) 19 20 22 24 25 26 27 28 29 30 31 32 33 ]
CPU P-States [ (16) 17 19 20 22 24 25 26 27 28 29 30 31 32 33 ]
CPU P-States [ (16) 17 19 20 21 22 24 25 26 27 28 29 30 31 32 33 ]
CPU P-States [ (16) 17 18 19 20 21 22 24 25 26 27 28 29 30 31 32 33 ]
CPU P-States [ (16) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 ]